Transmission No such file or directory error

Re: Transmission No such file or directory error

Thu, 25 Jun 2009 09:31:35 +0000

Thanks for all your help guys, finally got it working last night. It turns out that I had two instances of transmission on my little white box. One was located in "/var/www" and the other located in "/root/.config".
I can only imagine this is because I originally used the automated installation to get transmission on my box, which installed in "/var/www" but then the ipkg upgrade installed to "/root/.config".

I deleted all instances of transmission (including the S88 startup script that the automated inatallation did for me), issued ipkg remove, rebooted and then installed transmission again and Voila!

Kudos again for all the help guys n gals! :D

Re: Transmission No such file or directory error

Thu, 25 Jun 2009 07:51:31 +0000

I am about to finalize a Tranmission HOW TO. I will post in then ext couple of days.

Re: Transmission No such file or directory error

Thu, 25 Jun 2009 06:24:30 +0000

If it starts as user www-data it wants its config in /var/www/.config/transmission-daemon by default.
/var/www is the home-directory of www-data

My best guess is that you created the /root/.config/transmission-daemon/settings.json manually.
All changes to that file will not be used.
Even if you tell transmission-daemon to use that file because it can't see that file. Only root has permissions to open that directory.

Just remove transmission-daemon and follow a decent tutorial to install it.
I would just run transmission-daemon as root.

Re: Transmission No such file or directory error

Thu, 25 Jun 2009 00:06:18 +0000

try backing up the settings and then removing all the transmission installation and then reinstalling it and using the default configuration.

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 20:57:07 +0000

an ls -l command on /shares/internal gives me the follwing:

[root@FileServer internal]# ls -l
total 24
drwsrwsr-x 3 www-data www-data 4096 May 24 18:42 PUBLIC
drwxrwxrwx 5 www-data www-data 4096 May 24 17:38 TORRENT
drwsrwsr-x 2 www-data www-data 16384 Nov 12 2007 lost+found

and then an ls -l command within the torrent folder (where transmission settings.json links are) gives this:

[root@FileServer TORRENT]# ls -l
total 12
drwxr-xr-x 2 www-data www-data 4096 May 24 17:38 Complete
drwxr-xr-x 2 www-data www-data 4096 May 24 17:38 Downloading
drwxr-xr-x 2 www-data www-data 4096 May 24 18:08 Watchtorrent

Hope this helps

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 19:09:57 +0000

when i ssh into the box i log in as root but transmission starts automatically with an s88 startup script. Ive looked into the startup script and transmission is starting up as www-data.

All the directories are owned by www-data.

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 18:19:53 +0000

well easiest way to know is how do you login and what do you do to start it, If you are loging into the box with a username other than root and then starting it with out using the su or sudo command then it prolly is run by that username. Can you give a little info as to how you are starting the program?

also you can check who owns the folder with ls -l.

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 16:08:45 +0000

The directory location was previously in the correct syntax i.e \/ but still did not work. I use killall transmission command before making any changes to the settings.json file and even issue a reboot command to make sure changes are properly implemented.

Re: transmission running as root, I have a limited amount of unix knowledge and don't know how to check if transmission is running as root or not. :$

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 15:09:46 +0000

Are you running transmission as root? if so then 755 would be fine, but if not then check the ownership of the directory. Note you will also need to escape the "/" with "\", in other words for each "/" use "\/".

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 12:56:08 +0000

See my settings.json settings:
http://mybookworld.wikidot.com/forum/t-163773/noob-trying-to-install-transmission#post-513960

After a quick check the correct syntax are:

"watch-dir": "\/shares\/Public\/WWW\/Qtorrent\/Watchtorrent\/",
"download-dir": "\/shares\/Public\/WWW\/Qtorrent\/Downloading\/",

The complete-dir does not work AFAIK.

"complete-dir": "\/shares\/Public\/WWW\/Qtorrent\/Downloaded\/",

Note that if you change the settings.json whil the tranmission is running
you lose the changes. So the correct steps for changing settings.json would be:

1) Stop Transmission
2) Edit and Save settings.json
3) Start Transmission
4) Check settings.json again that it has what you want.

Re: Transmission No such file or directory error

Wed, 24 Jun 2009 11:51:36 +0000

The settings.json is as follows:

{
"alt-speed-down": 50,
"alt-speed-enabled": false,
"alt-speed-time-begin": 540,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": false,
"alt-speed-time-end": 1020,
"alt-speed-up": 50,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": true,
"complete-dir": "/shares/internal/TORRENT/Complete",
"dht-enabled": true,
"download-dir": "/shares/internal/TORRENT/Downloading",
"download-limit": 800,
"download-limit-enabled": true,
"encryption": 1,
"lazy-bitfield-enabled": true,
"message-level": 2,
"open-file-limit": 32,
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 51413,
"peer-port-random-high": 65535,
"peer-port-random-low": 49152,
"peer-port-random-on-start": false,
"peer-socket-tos": 0,
"pex-enabled": true,
"port-forwarding-enabled": false,
"preallocation": 2,
"proxy": "",
"proxy-auth-enabled": false,
"proxy-auth-password": "",
"proxy-auth-username": "",
"proxy-enabled": false,
"proxy-port": 80,
"proxy-type": 0,
"ratio-limit": 2.0000,
"ratio-limit-enabled": false,
"rpc-authentication-required": false,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "{985010b4e74933a74f1a92230ae8bb9a482b6505f5m23vXm",
"rpc-port": 9091,
"rpc-username": "",
"rpc-whitelist": "127.0.0.1",
"rpc-whitelist-enabled": false,
"speed-limit-down": 800,
"speed-limit-down-enabled": false,
"speed-limit-up": 100,
"speed-limit-up-enabled": true,
"upload-limit": 100,
"upload-limit-enabled": true,
"upload-slots-per-torrent": 14,
"watch-dir": "/shares/internal/TORRENT/Watchtorrent",
"watch-dir-enabled": true
}

I thought it might have been a permissions issue and have given the directories 755 permissions. But still no fix.

Any suggestions?

Re: Transmission No such file or directory error

Tue, 23 Jun 2009 23:38:25 +0000

Check your permissions on the file, I generaly get this issue when the download directory is not available to the user running transmission.

Re: Transmission "No such file or directory error"

Tue, 23 Jun 2009 18:08:47 +0000

what is you settings.json file?

try to set up the download-dir in the webGUI…

Transmission "No such file or directory error"

Tue, 23 Jun 2009 15:02:47 +0000

Im hoping someone can help me with this. Updated transmission from 1.34 to 1.72 yesterday and had heaps of issues with it ever since. Ive been through the threads almost a hundred times.

Basically, a torrent appears to start downloading but the stops saying "no such file or directory" Ive triple checked the location in the settings.json file which is: "\/shares\/internal\/TORRENT\/Downloading\/"

Im completely stumped why it wont work. The old 1.34 worked wondefully but i liked the idea of having a watch directory.

Cheers for any help