First steps - last step for my MBWE

First steps - last step for my MBWE

zeolite 23 Feb 2009 20:04

Hi Guys,

i tried to enable SSH on my MBWE (FW 2.00.18, 2x 500GB, RAID).

Followed this tutorial: http://mybookworld.wikidot.com/mbwe-get-in-test
Got the message, that download is not possible, i should try later.
I found in several posts, that sometimes there was the same problem, but the installation worked so i tried the test (Connect to your PUBLIC share and check the log file \\<Mybook>\PUBLIC\MBWE-Get-In-test.log). Got the message Congratulation : Firmware upgrade test is successfull.

Now i can't log in to the MBWE with my ip (10.0.0.2) or mybookworld.
In my Explorer i see it and can manage to use the files on it.

Any suggestions how i can log in now?
Did the SSH enable worked?

Greetz!

Re: First steps - last step for my MBWE

TeinturMan 23 Feb 2009 23:05

Hello zeolite,

1) The mbwe-get-in-test does not modify at all your Mybook. it is a script that will only dump a log in your PUBLIC Folder.
==> Your Test have been successfull.

2) So, now, you are ready to go to the next step : Install SSH Hack
http://mybookworld.wikidot.com/ssh-enable

3) And then you will be ready for the final step : which will configure all other needed software on your Mybook…
http://mybookworld.wikidot.com/featurepacks

Regards,

Re: First steps - last step for my MBWE

zeolite 24 Feb 2009 18:53

i handled it to reboot the MBWE correct now but when i try this step:

http://<Mybook>/auth/firmware_upgrade.pl?fwserver=us
ers6.nofeehost.com/MybookAlternative/MBWE-SSH-ENABLE

but i don't see the interface as mentioned, just a empty site is there!?

Last edited on 24 Feb 2009 19:07 by zeolite Show more

Re: First steps - last step for my MBWE

TeinturMan 24 Feb 2009 19:37

have you replaced <Mybook> with your Mybook 's ip address?
I have just retested the link and it is operational.

When using the provided link,
The Shared Storage Manager should be launched directly on the Upgrade firmware page…

Re: First steps - last step for my MBWE

zeolite 24 Feb 2009 20:14

hi,

i have replaced the mybook with my 10.0.0.2 ip adress.
thats why i can't really understand it.

thanks for your suggestions

Re: First steps - last step for my MBWE

zeolite 25 Feb 2009 17:29

i just also saw, that when i klick in the "general setup" "upgrade the system firmware" i also come to a blank white site.

could it be that the installation didn't work 100% and stopped at a point?

Re: First steps - last step for my MBWE

TeinturMan 25 Feb 2009 17:42

Hi zeolite,
you wrote that the first test you did with MBWE-Get-in-test generated a log file.
could you send it to me by private mail, so that i can check if any thing is strange in it?

the MBWE-Get-in-test does not modify the Mybook, so i think there is another thing that has happened….
have you tried to install any other hacks before the MBWE-Get-in-test?
Regards,

Re: First steps - last step for my MBWE

zeolite 26 Feb 2009 19:04

i solved the problem now.

deleted the # in the row that the ssh is enabled after reboot and worked!

was able to install the rest of the hacks.
now its a little bit scary for me how i can access to my mbwe from the inet via ftp or have access as an web server or sth like that. dyndns?

Re: First steps - last step for my MBWE

TeinturMan 26 Feb 2009 19:27

Hi, if you want to access your mybook from internet, you need to install accessbook,
then configure your home router to forward port 443 to your Mybook.

Re: First steps - last step for my MBWE

zeolite 26 Feb 2009 20:06

i installed accessbook and configured my router. but which adress i use from outside? this point i just can't imagine…

thanks a lot for your help

Re: First steps - last step for my MBWE

TeinturMan 26 Feb 2009 23:46

You must use your PUBLIC IP ADDRESS :
you can know your public ip address using the following web site :
http://whatismyipaddress.com/
then access your Mybook :

https://PUBLIC_IP_ADDRESS

Note your public/external ip address somewhere . if you see that it changes after a few weeks, then you
will have to configure a no-ip account
'http://www.no-ip.com

Regards.

Re: First steps - last step for my MBWE

Dishon 18 Jun 2009 18:47

OK My turn. I can't delete one of the 5 shares I created at the same time. All the others are fine. So I am going to give ssh a try. However,

http://192.168.10.10/auth/firmware_upgrade.pl?fwserver=users6.nofeehost.com/MybookAlternative/MBWE-Get-In-test

and logging in with the user name and password created way back when I first got MBWE and use to access all the shares inc the \PUBLIC from winows explorer, I get "There is no new firmware available"

I have a the 1Tb edition with firmware 01.01.18 but have noticed that there is mention of menu options on the web server for disk management tab that I don't have.

I can access 192.168.10.10\PUBLIC from windows explorer.

Is there anything else I can try?

Ta,

Stephen