Howto install uShare for "MyLenny" firmware
Details for installing a working uShare with DLNA support in the "MyLenny" firmware:
1º Packages needed:
aptitude install gcc make pkg-config ffmpeg libavformat-dev libavcodec-dev2º uPnP/DLNA libraries needed:
wget http://heanet.dl.sourceforge.net/sourceforge/pupnp/libupnp-1.6.6.tar.bz2
tar -xvjf libupnp-1.6.6.tar.bz2
cd libupnp-1.6.6
./configure
make
make install
cd ..
wget http://libdlna.geexbox.org/releases/libdlna-0.2.3.tar.bz2
tar -xvjf libdlna-0.2.3.tar.bz2
cd libdlna-0.2.3
./configure
make
make install
cd ..3º Install uShare:
wget http://ushare.geexbox.org/releases/ushare-1.1a.tar.bz2
tar -xvjf ushare-1.1a.tar.bz2
cd ushare-1.1a
./configure --prefix=/usr/local --sysconfdir=/etc --enable-dlna --disable-nls
make
make install
cd ..4º Reload libraries:
ldconfig5º Configure uShare:
Change DAEMON definition in /etc/init.d/ushare
#DAEMON=/usr/bin/ushare
DAEMON=/usr/local/bin/ushare
Configure /etc/ushare.conf
USHARE_NAME=uShareMyLenny
USHARE_IFACE=eth0
USHARE_PORT=49200
USHARE_TELNET_PORT=1337
USHARE_DIR=<dir to ushare>
ENABLE_WEB=yes
ENABLE_TELNET=yes
ENABLE_XBOX=yes
ENABLE_DLNA=yes6º Run ushare:
/etc/init.d/ushare start7º If everything works ;), configure for starting in every reboot:
ln -s /etc/init.d/ushare /etc/rc0.d/K99ushare
ln -s /etc/init.d/ushare /etc/rc2.d/S99ushare8º Enjoy!!
