[Solved] No DHCP address assignment to White Light (WL) from D-link DIR 855

Summary:

If the NAS is hooked up to the Router, Router does not assign an IP. Solved by hard reseting the NAS again.

No DHCP address assignment to White Light (WL) from D-link DIR 855

anpe008 08 Aug 2009 13:12

After a reset on the back i can not see the WL in the lan table in my router. All other laptops, pc are automatically assigned by the router if they are connected to the router. Just the WL is missing.

How can I make my WL to visible in my LAN?

My settings:

Router IP Address:192.168.1.1
Subnet Mask: 255.255.255.0
DHCP IP Address Range: 192.168.1.100 - 192.168.1.250
WL IP address before reset:192.168.1.101

I can not do anything till i can see the WL in my lan connections…
Any help appreciated.

Additional info:
1) When i plug the ethernet cable to WL the green leds is on continously while the orange one is changing sec to sec…
2) Before reset when the WL booted up it is started to flash because it reaches more then 95% of the capacity. When i boot it up now i have a solid, continuous line, no flashing at all

Last edited on 08 Aug 2009 13:31 by anpe008 Show more

Re: No DHCP address assignment to White Light (WL) from D-link DIR 855

anpe008 08 Aug 2009 13:55

After another WL reset i have now IP address, can telnet in but can not see the WL shares using WD Discovery or simply running \\MyBookWorld. Although ping 192.168.1.101 (WL IP) works from the laptop.

If i go to the admin webGUI (http://192.168.1.101/) the error that i receive:

XML error: no wixnas object found!

And at the first time when i wanted to log in in webgui it said no space and can not write to WL….

In telnet i can not modify any files, i receives always this:

-bash: echo: write error: No space left on device

It seems that all shares are empty, even when i use "ls -lah" i do not see anything… —>

does it mean that all files are gone that i have there?

I checked /var/log/messages and saw that error:

Aug 6 23:56:17 MyBookWorld daemon.err lld2d[1351]: osl_write_pidfile: couldn't parse "xÛ^A@\M^B@xÛ^A@$­^A" as a pid (from file /var/run/lld2d-eth0.pid); aborting

and it seems that the CPU us always runs on 100% (50%-50% user-sytem)

Last edited on 08 Aug 2009 14:18 by anpe008 Show more

Re: No DHCP address assignment to White Light (WL) from D-link DIR 855

anpe008 08 Aug 2009 15:38

I continue my thread in:
http://mybookworld.wikidot.com/forum/t-171834/my-book-world-edition-white-unbrick-guide