I have a MBWE with 1 TB and I've change it with a hard drive of 250 GB. To put it I used the guide with title "how-to-fix-bricked-wd-my-book-world-edition-or-install-brand-new-disk"
I configured the file mbwe-config.sh and I ran the following command:
$ sudo bash ./mbwe-install.sh
I connected the hard drive and I go to the web management. A % is showed and it took many hours until finally finished booting. I checked all and I saw that the DataVolume had an error. I entered through ssh and tried to mount it at /DataVolume but it also gave errors. How I hadn't data, I formatted it and I could mount:
$ mkfs.xfs /dev/md2
$ mount /dev/md2 /DataVolume
But when I look at the partitions are mounted, I don't see md1:
$ df -h
Filesystem Size Used Available Use% Mounted on
/dev/md0 1.8G 115.2M 1.6G 6% /
/dev/md3 949.6M 120.4M 780.9M 13% /var
/dev/md2 229.7G 8.8M 229.7G 0% /DataVolume
/dev/ram0 61.9M 16.0k 61.9M 0% /mnt/ram
Is this okay? Do I have to mount md1? Where?
PD: Sorry for my english