In the attempt to update the OS to Debian wheezy I completely bricked the firmware. It doesnt respond to http or ssh requests anymore.
After reading some pages about unbricking I installed a USB tty cable and can see the start-up messages. Unfortunately the cable doesnt work properly and I cant send the typed letters to the device. Anyway, here is the start-up log:
U-Boot 2009.08-svn54115 (Nov 15 2011 - 10:54:56), Build: 0.0.12
CPU: AMCC PowerPC APM82181 Rev. D at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
Security support
Bootstrap Option E - Boot ROM Location NOR/SRAM (8 bits)
32 kB I-Cache 32 kB D-Cache
Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB
I2C: ready
DRAM: Auto calibration 256 MB
FLASH: 512 kB
DTT: 1 FAOLEt^zz12 Net: PHY EC1 Register: 0x2c8c
ppc_4xx_eth0
Type run flash_nfs to mount root filesystem over NFS
p============================================================================q
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::WWWWWWWWW::::WWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDD::::::::::::|
|:::::::::::WWWWWWWW::::WWWWWWWW:::::::WWWWWWW::DDDDDDDDDDDDDdDDDDD:::::::::|
|:::::::::::WWWWWWWW:::WWWWWWWWW::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDDDD:::::::::|
|::::::::::::::::::::::::::::::::::::::::::::::::::::::::::DDDDDDDDDDD::::::::|
|::::::::WWWWWWW:::WWWWWWWWWW::::WWWWWWW::DDDDDDDDD:::::::DDDDDDDDD::::::::|
|:::::::::::WWWWWWW::WWWWWWWWWWW:::WWWWWWW::DDDDDDDDD::::::::DDDDDDDDD::::::::|
|:::::::::::WWWWWW::WWWWWW::WWWWWWW::DDDDDDDDDD:::::::DDDDDDDDDD::::::::|
|:::::::::::WWWWWWWWWWWWW:::WWWWWWWWWWWW::DDDDDDDDDD::::::DDDDDDDDDDD:::::::::|
|:::::::::::WWWWWWWWWWWW::::WWWWWWWWWWW::DDDDDDDDDDD::ttt:::::::::|
|:::::::::::WWWWWWWWWWW:::::WWWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::|
|:::::::::::WWWWWWWWWW::::::WWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDD:::::::::::|
|:::::::::::WWWWWWWWW:::::::WWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::::|
|:::::::::::WWWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD:::::::::::::::::::::|
|::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
b==================================================?=??=====================d
Hit any key to stop autoboot: 0
USB: OTG-Controller ID(0x4F54) Version(0x290A)
Err detect usb time out hostport.d32 0x00001000
0 USB Device(s) found
o/{ng bus for storage devices…
0 Storage Device(s) found
** Block device usb 0 not supported
Board is not configured for test. Do normal boot.
- Checking Boot Partitions -
SATA DWC initialization 0
init: Waiting for device…
sata_dwc: Device found
scan: Waiting for device…
SATA DWC initialization 1
init: Waiting for device…
sata_dwc: Device found
scan: Waiting for device…
Loading file "/booty{{wycr" from sata device 1:1 (gpt1)
1223 bytes read
1:1
## Executing script at 00100000
Boot from md0 U-boot configuration
=============== Device tree =================
=============== Root filesystem =================
SATA DWC iitia{zation 0
init: Waiting for device…
sata_dwc: Device found
scan: Waiting for dwce…
SATA DWC initialization 1
init: Waiting for device…
sata_dwc: Device found
scan: Waiting for device…
Loading file "/boot/uImage" from sata device 1:1 (gpt1)
3501769 bytes read
Loading file "/boot/apollo3g.dtb" from satadevice 1:1 (gpt1)
8373 bytes read
Loaded part 1
## ooting kernel from Legacy Image at 01000000 …
Image Name: Linux-2.6.32.11-svn70860
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 3501705 Bytes = 3.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum … OK
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Uncompressing Kernel Image … OK
Loading Device Tree to 00ffa000, end 00fff0b4 … OK
44x Platform machine description
Linux version 2.6.32.11-svn70860 (steveh@steveh-pc) (gcc version 4.2.2) #1 Thu May 17 13:32:51 PDT 2012
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00001000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00001000
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouig off. Total pages: 4094
Kernel command line: root=/dev/md1 rw rootfstype=ext3 rootflags=data=ordered console=ttyS0,115200
PID hash table entries: 1024 (order: -4, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 1, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 0, 65536 bytes)
Memory: 253184k/262144k available (7168k kernel code, 8960k reserved, 512k data, 749k bss, 448k init)
Kernel virtual memory layout:
* 0xfffe0000..0xfff0000 : fixmap
* 0xfd600000..0xfe000000 : consistent mem
* 0xfd600000..0xfd600000 : early ioremap
* 0xd1000000..0xfd600000 : vmalloc & ioremap
Hierarchical RCU implementation.
NR_IRQS:512
UIC0 (32 IRQ sources) a DCR 0xc0
UIC1 (32 IRQ sources) at DCR 0xd0
UIC2 (32 IRQ sources) at DCR 0xe0
UIC3 (32 IRQ sources) at DCR 0xf0
clocksource: timebase mult[500000] shift[22] registered
Security Framework initialized
Mount-cache hash tableentrY.'ʒj
xor: measuring software checksum speed
8regs : 128.000 MB/sec
8regs_prefetch: 240.000 MB/sec
32regs : 112.000 MB/sec
32regs_prefetch: 240.000 MB/sec
xor: using function: 32regs_prefech (240.000 MB/sec)
NET: Registered protocol family 16
OCM1: 32768 Bytes (enabled)
OCM1: 32768 Bytes (non-cached)
OCM1: 0 Bytes (cached)
256k L2-cache enabled
PCI: Probing PCI hardware
bio: create slab <bio-0> at 0
SCSI sbystY[Jѥ镑5
raid6: int32x1 185 MB/s
raid6: int32x2 189 MB/s
raid6: int32x4 197 MB/s
raid6: int32x8 189 MB/s
raid6: using algorithm int32x4 (197 MB/s)
mod_init:1052
ppc460ex_dma_per_chan_init:1064
Switchin#clocksource timebase
init_pipe_fs: pipe_inode_cache initialized
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 0, 65536 bytes)
TCP established hash table entries: 8192 (order: 0, 65536 bytes)
TCP bind hash table entries: 8192 (order: -1, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: RekѕՑtc transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Probing AMCC DMA driver
PPC4xx PLB DMA engine IRQ 20
__ioremap(): phys addr 0x0 is RAM lr c04d50c4
PPC460ex PLB DMA engine @0x00_00000100 size 263
new_chan->chan_id 0x0
new_chan->chan->chan_id 0x0
apollo3g_gpio_init: GPIO 1 @ 0xe0000000; GPIO 2 @ 0xe1000000
Installing knfsd (copyright (C) 1996 ed.bws.danom|riko#ed.bws.danom|riko).
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/O].
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.13)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been s_#
161Cryptodev Interface Loaded
User space CryptoAPI driver v0.1 loaded
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduer cfq registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550A
console [ttyS0] enabled
4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq#J#J́a 16550
brd: module loaded
sata-dwc 4bffd1000.sata: Gettting DMA channel 0
sata-dwc 4bffd1000.sata: id 0, controller version 1.91
sata-dwc 4bffd1000.sata: DMA initialized
sata-dwc 4bffd1000.soa: DMA CFG = 0x00000001
dma_register_interrupt register irq (25)
ata4294967295: sata_dwc_port_start: setting burst size in DBTSR: 0x00100010
sat##хdwcd1000.sata: GEN II speed rate negotiated
ata1: SATA max UDMA/133 irq 23
sata-dwc 4bffd1800.sata: Gettting DMA channel 1
sata-dwc 4bffd1800.sata: id 0, controller version 1.91
sata-dwc 4bffd1800.sata: DMA initialized
sata-dwc 4bffd1800.sata DMA CFG= 0x00000001
dma_register_interrupt register irq (25)
ata4294967295: sata_dwc_port_start: setting burst size in DBTSR: 0x00100010
sata-dwc 4bffd1800.sata: GEN II speed rate negotiated
s+##aa-dwc
ata2: SATA max UDMA/133 irq 27
Found: SST 39LF040
4fff80000.nor_flash: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brok˫
RedBoot partition parsing not available
Creating 2 MTD partitions on "4fff80000.nor_flash":
0x000000000000-0x000000020000 : "3genv"
0x000000020000-0x000000080000 : "u-boot"
ndfc 4fff80000.ndfc: failed to u#j
199 ndfc: probe of 4fff80000.ndfc failed with error -5
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
PPC 4xx OCP EMAC driver, version 3.54
mal0: descriptor-mmory = ocm
MAL: Enabled Interrupt Coal TxCnt: 1 RxCnt: 8
TxTimer: 0 RxTimer: 10000
MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels
RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO suppor208TAH /plb/opb/emac-tah@ef601350 initialized
/plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
bcm54610_init: before 0x2c8c, after 0x2c8c
bcm54610_init: before 0x01e1, 0x0200; after 0x0141, 0x0200
eh0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:90:a9:b6:3b:77
eth0: found BCM54610 Gigabit Ethernet PHY (0x01)
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
t: UniverTUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <moc.mmoclauq|kxam#moc.mmoclauq|kxam>
Fusion MPT base driver 3.04.12
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.12
input: rst_buttoa?z"٥ͽvirtual/input/input0
i2c /dev entries driver
ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: rZV#ͽregistered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
Registr#bdevice: a3g_led
AMCC 4xx PKA v0.1 @0x04_00114000 size 16384 IRQ 39
Initializing PKA…
PKA Driver Successfully Initialized
Reading pvr value = 12c41c82
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
d#х́= 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt satus = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
ɽF0300)ink up 3.0 Gbps (SStat?#295ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F0300)
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
apm82181-adma: Probing AMCC APM82181 ADMA engines…
AMCC(R) APM82181 ADMA Engine found [1]: ( capabilities: memcp )
--- dma_async_device_register: 683-----
ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 1/32)
apm82181 adma1: alloc|W###"͍ɥѽɁslots
AMCC(R) APM82181 ADMA Engine found [2]: ( capabilities: memcpy )
--- dma_async_device_register: 683-----
apm82181 adma2: allocated 512 descriptor slots
AMCC() AM82181 ADMA Engine found [3]: ( capabilities: memcpy )
--- dma_async_device_register: 683-----
apm82181 adma3: allocated 512 descriptor slots
ata2.00: configured for UDMA/133
oprofile: usig timer interrupt.
Macsec proc interface Initiliazed
Registered Macsec Interface
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Cor#5
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge fWregistered
802.1Q VLAN Support v1.8 Ben Greear <moc.hcetalednac|braeerg#moc.hcetalednac|braeerg>
All bugs added by David S. Miller <moc.tahder|mevad#moc.tahder|mevad>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 1/32)
ata1.00: configured for UDMA/133
blk_queue_max_hw_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00P51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
blk_queue_max_hw_segments: settominimum 1
scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sda:
sd 1:0:0:0: [sdb] Write Protect is of
?#҂҂҂#͑uWrite cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sda1 sda2 sda3 sda4
sdb1 sdb2 sdb3 sdb4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda3
md: sda3 does not havea vaid v0.90 superblock, not importing!
md: invalid raid superblock magic on sda4
md: sda4 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdb3
md: sdb3 does not have a valid v0.90 supY.,k not importing!
md: invalid raid superblock magic on sdb4
md: sdb4 does not have a valid v0.90 superblock, not importing!
md: Scanned 8 and added 4 devices.
md: autorun …
md: considering sdb2 …
md: adding sdb2 …
md adding sdb1 …
md: adding sda2 …
md: adding sda1 …
md: created md1
md: bind<sda1>
md: bind<sda2>
md: bind<sdb1>
md: bind<sdb2>
md: running: <sdb2><sdb1><sda2><sda1>
md: kicking non-fresh sda2 fom arraHCmd: unbind<sda2>
md: export_rdev(sda2)
md: kicking non-fresh sda1 from array!
md: unbind<sda1>
md: export_rdev(sda1)
md1: WARNING: sdb2 appears to be on the same physical disk as sdb1.
True protection against ingle-disk failure might be compromised.
raid1: raid set md1 active with 2 out of 4 mirrors
md1: detected capacity change from 0 to 2047803392
md: … autorun DONE.
md1: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) on device 9:1.
Feeing unused kernel memory: 448k init
INIT: versn 2.88 booting
Retrieving saved clock:Mon Mar 3 06:56:22 CET 2014
Set clock to Mon Mar 3 06:56:22 CET2014393.
/etc/rcS.d/S02restoreSettings.sh: Checking settings: test/restore….._: pkg: wd-nas
_: pkg: networking-general
[networking-general.preinst] 03/03/14 05:56:24: test
[networking-general.preinst] 03/03/14 05:56:24: done.
[networking-general.postinst] 03/03/14 05:56:24: test context=test
[networking-general.postinst] 03/03/14 05:56:24: done.
_: pkg: apache-php-webdav
[apache-php-webdav.preinst]03/03/14 05:56:25: test
[apache-php-webdav.preinst] 03/03/14 05:56:25: done.
[apache-php-webdav.postinst] 03/03/14 05:56:25: test context=test
[apache-php-webdav.postinst] 03/03/14 05:56:25: done.
_: pkg: date-time
[date-time.preinst] 03/03/14 05:56:26: test
[date-time.preinst] 03/03/14 05:56:26: done.
[date-time.postinst] 03/03/14 05:56:26: test context=test
[date-time.postinst] 03/03/14 05:56:26: done.
_: pkg: alerts
[alerts.preinst] 03/03/14 05:56:27: test
[alerts.preinst] 03/03/14 05:56:27: done.
[alerts.postinst] 03/03/14 05:56:27: test context=test
[alerts.postinst 03/03/14 05:56:27: done.
_: pkg: admin-rest-api
[admin-rest-api.preinst] 03/03/14 05:56:27: test
[admin-rest-api.preinst] 03/03/14 05:56:27: test()
[admin-rest-api.preinst] 03/03/14 05:56:27: done.
[admin-rest-api.posi~st] 03/03/14 05:56:28: test context=test
drwxrwsr-x 2 root www-data 4096 Oct 9 03:05 config
[admin-rest-api.postinst] 03/03/14 05:56:28: permissions check for var/www/Admin/webapp/config: PASSED
[admin-rest-api.postinst] 03/03/14 05:56:28: permissions check for /dynamicconfig.ini: FAILED
drwxrwxr-x 2 root www-data 4096 Dec 27 00:02 orion
[admin-rest-api.postinst] 03/03/14 05:56:28: permissions check for //usr/local/nas/orion/: PASSED
-rwxrwxr-x 1 root www-data 79872 Dec 27 00:02 //usr/local/nas/orionorion.db
[admin-rest-api.postinst] 03/03?14 05:56:28: permissions check for usr/local/nas/orionorion.db: PASSED
[admin-rest-api.postinst] 03/03/14 05:56:28: setup test for admin-rest-api: PASSED
[admin-rest-api.postinst] 03/03/14 05:56:28: done.
_: pkg: drive-lib
[drive-lib.preinst] 03/03/14 05:56:29: test
[drive-lib.preinst] 03/03/14 05:56:29: done.
[drive-lib.postinst] 03/03/14 05:56:29: test context=test
[drive-lib.postinst] 03/03/14 05:56:29: done.
_: pkg: data-volume-config
[data-volume-config.preinst] 03/03/14 05:56:30: test
[data-volume-config.preinst] 03/03/14 05:56:30: done.
[data-volume-config.postinst] 03/03/14 05:56:30: te?#ѕtest
[data-volume-config.postinst] 03/03/14 05:56:30: done.
_: pkg: upnp-nas
[upnp-nas.preinst] 03/03/14 05:56:30: test
[upnp-nas.preinst] 03/03/14 05:56:30: done.
[upnp-nas.postinst] 03/03/14 05:56:31: test context=test
[upnp-nas.postinst] 03/03/14 05:56:31: done.
_: pkg: dlna-server-access
[dla-server-occess.preinst] 03/03/14 05:56:31: test
[dlna-server-access.preinst] 03/03/14 05:56:31: done.
[dlna-server-access.postinst] 03/03/14 05:56:32: test context=test
[dlna-server-access.postinst] 03/03/14 05:56:32: done.
_: pkg: itunes
[itunes.preinst] 03/03/14 05:56:32: tes451[itunes.preinst] 03/03/14 05:56:32: done.
[itunes.postinst] 03/03/14 05:56:32: test context=test
_: pkg: nas-safepoint
[nas-safepoint.preinst] 03/03/14 05:56:33: test
[nas-safepoint.preinst] 03/03/14 05:56:33: done.
[nas-safepoint.postinst] 03/03/14 05:56:33: test context=test
[nas-safepoint.postinst] 03/03/14 05:56:33: done.
_: pkg: webui
[weui.preinst] 03/03/14 05:56:34: test
[webui.preinst] 03/03/14 05:56:34: done.
[webui.postinst] 03/03/14 05:56:34: test conext=test
[webui.postinst] 03/03/14 05:56:34: done.
_: pkg: orion-resources
[orion-resources.preinst] 03/03/14 05:56:34: test
[orion-resources.preinst] 03/03/14 05:56:34: done.
[orion-resources.postinst] 03/03/14 05:56:35: test context=test
[orion-esources.postinst] 03/03/14 05:56:35: done.
_: pkg: afp
[afp.preinst] 03/03/14 05:56:35: test
[afp.preinst] 03/03/14 05:56:35: done.
[afp.postinst] 03/03/14 05:56:36: test context=test
[afp.postinst] 03/03/14 05:56:36: done.
done.
Starting the hplug events dispatcher: udevd.
Synthesizing the initial hotplug events…done.
/usr/local/sbin/drive_helper.sh: 43: Syntax error: "(" unexpected (expecting "}")
Setting parameters of disc: (none).
[: 41Disable EMAC EMI Fix
EMI patch disabled…
cpu=APM82181 rev=28.130
Activating swap…done.
Cleaning up ifupdown….
Loading kernel modules…done.
Activating lvm and md swap…done.
Checking file systems…fsck from util-linux-ng 2.17.2
done.
Setting kernel variables (/etc/sysc#i…done.
Setting kerne vaiables (/etc/sysctl.d/dlna.conf)…done.
Setting kernel variables (/etc/sysctl.d/inotify.conf)…done.
Setting kernel variables (/etc/sysctl.d/mtu.conf)…done.
Mounting local filesystems…done.
Activating swapfile swap…done.
Cleaning up temporary files….
Setting up networking….
[: 72: unexpected operator
[: 72: unexpected operator
Configuring network interfaces…[: 10: enabled: unexpected operator
logger: hostname=Z2
[: 58: false: unexpected operator
[: 5: 4: unexpected operator
[: 8: 1: unexpected operator
eth0: link is down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[: 5: 4: unexpected operator
[: 6: 4: unepcted operator
[: 8: 4: unexpected operator
done.
Starting portmap daemon….
Cleaning up temporary files….
INIT: Entering runlevel: 1
/usr/local/sbin/drive_helper.sh: 43: Syntax error: "(" unexpected (expecting "}")
/etc/rc1.d/S02purgelogs.sh: 14: Syntax error: "(" unexpected (expecting "}")
Starting ramlog-tmpfs 2.0.0: .
Starting enhanced syslogd: rsyslogd.
/etc/rc1.d/S04apache2: 13: source: not found
/usr/local/sbin/drive_helper.sh: 43: Syntax error: "(" unexpected (expect}H/usr/local/sbin/drive_helper.sh: 43: Syntax error: "(" unexpY,W##B*ѥ"}")
S15mountDataVolume.sh: begin script: start
#jչсdata volume…[: 159: unexpected operator
[: 159: unexpected operator
[: 159: unexpected operator
mount: special device /dev/md3 does not exist
logger: mount o /dש on /DataVolume failed: 32
umount2: Invalid argument
umount: /DataVolume: not mounted
fsck from util-linux-ng 2.17.2
fsck.ext2: No such file or directory while trying to open /dev/md3
/dev/md3:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
logger: fsck of /dev/md on faled: 8
[: 159: 1: unexpected operator
[: 159: 0: unexpected operator
mount: special device /DataVolume/cache does not exist
mount: special device /DataVolume/shares does not exist
mount: special device /DataVolume/shares does not exist
_: pkg: wd-nas
_: pkg: networking-general
_: pkg: apache-php-webdav
_: pkg: date-time
_: pkg: alerts
_: pkg: admin-rest-api
[admin-rest-api.preinst] 03/03/14 05:56:51: test
[admin-rest-api.preinst] 03/03/14 05:56:51: test()
[admin-rest-api.preku03/03/14 05:56:51: done.
[admin-rest-api.postinst] 03/03/14 05:56:52: tes conext=test
drwxrwsr-x 2 root www-data 4096 Oct 9 03:05 config
[aV+˫Iѵapi.postinst] 03/03/14 05:56:52: permissions check for var/www/Admin/webapp/config: PASSED
[admin-rest-api.postinst] 03/03/14 05:56:52: pemissions check for /dynamicconfig.ini: FAILED
drwxrwxr-x 2 root www-data 4096 De 27 00:02 orion
[admin-rest-api.postinst] 03/03/14 05:56:52: permissions check for //usr/local/nas/orion/: PASSED
-rwxrwxr-x 1 root www-data 79872 Dec 27 00:02 //usr/local/nas/orionorion.dbCrest-api.postinst] 03/03/14 05:56:52: permissions check for //usr/local/nas/D
[admin-rest-api.postinst] 03/03/14 05:56:52: setup test for admin-rest-api: PASSED
[admin-rest-api.postinst] 03/03/14 05:56:52: done.
_: pkg: drive-lib
_: pkg: data-volume-config
_: pkg: upnp-nas
_: pkg: dlna-server-access
_: pkg: itunes
_: pkg: nas-safepoint
_: pkg: webui
_: pkg: orion-resources
_: pkg: afp
swapon: /dev/md2: stat failed: No such file or directory
Kernel API version: 2
settrustees API version: 2
Pass 1: Checking for parse ers
Could not find device /dev/md3
Parse error /tmp/trustees.mod:9
done.
Starting Network Interface Plugging Daemon: eth0.
Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools … (warning).
Asking all remaining processes to terminate…done.
All processes ended within 1 seconds….done.
Starting reset button monitor: resetbtnd.
Will now switch to single-user mode.
INIT: Sendg processes the TERM sGive root password for maintenance
(or type Control-D to continue):
Here I am stuck now. I am not sure how to continue.
Is it possible to install packages on the drives if I attach them to a Debian PC, that is a cross-architecture apt-get install?
I am open to any advice
thanks
RE
