Hi folks!
having trouble!
I´m TOTALY new in programming at all! but ftp on my mybook was just something i MUST HAVE! hehe!
I used this guide;
http://www.nanalegumene.net/using-ssh-and-ftp-on-western-digital-mybook-world/
and after that i really dident know what to do, because on the forums ppl dont write they EXACT has written in thir program files if u know what i mean..
problem is, i cant acces my ftp by typing ftp://192.168.1.5/ in IE and when i use my login and and thru windows i dont get acces either, BUT jeg can access it all by typing \\192.168.1.5\ on a random address field on my pc, and there i logged in using my user and pass
another thing that works is my wed managment interface…. :)
http://192.168.1.5:8080/cgi-bin/webif.sh
Here is what my files says;
- Example config file /etc/vsftpd.conf
#
- The default compiled in settings are fairly paranoid. This sample file
- loosens things up a bit, to make the ftp daemon more usable.
- Please see vsftpd.conf.5 for all compiled in defaults.
#
- READ THIS: This example file is NOT an exhaustive list of vsftpd options.
- Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
- capabilities.
#
- Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
- Uncomment this to allow local users to log in.
#local_enable=YES
#
- Uncomment this to enable any form of FTP write command.
#write_enable=YES
#
- Default umask for local users is 077. You may wish to change this to 022,
- if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
- Uncomment this to allow the anonymous FTP user to upload files. This only
- has an effect if the above global write enable is activated. Also, you will
- obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
- Uncomment this if you want the anonymous FTP user to be able to create
- new directories.
#anon_mkdir_write_enable=YES
#
- Activate directory messages - messages given to remote users when they
- go into a certain directory.
dirmessage_enable=YES
#
- Activate logging of uploads/downloads.
xferlog_enable=YES
#
- Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
- If you want, you can arrange for uploaded anonymous files to be owned by
- a different user. Note! Using "root" for uploaded files is not
- recommended!
#chown_uploads=YES
#chown_username=whoever
#
- You may override where the log file goes if you like. The default is shown
- below.
#xferlog_file=/var/log/vsftpd.log
#
- If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
- You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
- You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
- It is recommended that you define on your system a unique user which the
- ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
- Enable this and the server will recognise asynchronous ABOR requests. Not
- recommended for security (the code is non-trivial). Not enabling it,
- however, may confuse older FTP clients.
#async_abor_enable=YES
#
- By default the server will pretend to allow ASCII mode but in fact ignore
- the request. Turn on the below options to have the server actually do ASCII
- mangling on files when in ASCII mode.
- Beware that on some FTP servers, ASCII support allows a denial of service
- attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
- predicted this attack and has always been safe, reporting the size of the
- raw file.
- ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
- You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
- You may specify a file of disallowed anonymous e-mail addresses. Apparently
- useful for combatting certain DoS attacks.
#deny_email_enable=YES
- (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
- You may specify an explicit list of local users to chroot() to their home
- directory. If chroot_local_user is YES, then this list becomes a list of
- users to NOT chroot().
#chroot_list_enable=YES
- (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
- You may activate the "-R" option to the builtin ls. This is disabled by
- default to avoid remote users being able to cause excessive I/O on large
- sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
- the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
My passwd file;
got it thru "vi"
Using username "BLICHER".
5.1.861.291|REHCILB#5.1.861.291|REHCILB's password:
[BLICHER@MYBOOKWORLD ~]$ su -
[root@MYBOOKWORLD ~]# vi /etc/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
bin:x:2:2:bin:/bin:/bin/sh
sys:x:3:3:sys:/dev:/bin/sh
sync:x:4:100:sync:/bin:/bin/sync
mail:x:8:8:mail:/var/spool/mail:/bin/sh
proxy:x:13:13:proxy:/bin:/bin/sh
www-data:x:33:33:www-data:/var/www:/bin/sh
backup:x:34:34:backup:/var/backups:/bin/sh
operator:x:37:37:Operator:/var:/bin/sh
sshd:x:103:99:Operator:/var:/bin/sh
nobody:x:99:99:nobody:/home:/bin/sh
default:x:1000:1000:Default non-root user:/home/default:/bin/sh
guest:x:1001:500:guest:/home/guest:/bin/bash
mionet-blicher:x:1004:1004:Linux User,:/home/mionet-blicher:/bin/sh
BLICHER:x:1005:1005:Linux User,:/shares/internal:/bin/sh
~
~
~
~
~
~
~
- /etc/passwd 1/16 6%
my /etc/group
[root@MYBOOKWORLD ~]# vi /etc/group
root:x:0:
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:
tty:x:5:
disk:x:6:
lp:x:7:
mail:x:8:
www-data:x:33:
backup:x:34:
utmp:x:43:
staff:x:50:
nobody:x:99:
users:x:500:
default:x:1000:
mionet-blicher:x:1004:
BLICHER:x:1005:
www-data:x:33:BLICHER
~
~
~
~
- /etc/group 1/19 5%
WHAT is need help for is ofc, getting acccess thru ftp ( the internet .. )
And learn how the add users, and "tell" them which folder they have access to..
step by step…
But i´m a quick learner!!!!underline text
Best Regards BLICHER
BTW! write me and email if u want to…
moc.liamg|96rehcilB#moc.liamg|96rehcilB