Hardware on 2nd gen. MBWE

System is based on the OXE810SE/OXE810DSE SoC chip.

/proc/cpuinfo:
Processor : ARM926EJ-S rev 5 (v5l)
BogoMIPS : 183.09
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 5
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 32768
I assoc : 4
I line length : 32
I sets : 256
D size : 32768
D assoc : 4
D line length : 32
D sets : 256

RAM is Hynix HY5PS1G1631C

Ethernet controller?

lspci -vv

Serial port

PCB images

MBWE_white_PCB_front
MBWE_white_PCB_back

Images borrowed ;-) from zeroone.homeunix.net which has moved to http://mockmoon-cybernetics.ch/computer/wdh1nc10000/

1TB White Light dmesg Log Covering Device Bootup:

CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: root=/dev/md0 console=ttyS0,115200 elevator=cfq mac_adr=0xAA,0xBB,0xCC,0xDD,0xEE,0xFF mem=128M wixmodel=WWLXN poweroutage=yes adminmode=recovery
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 126592KB available (2892K code, 152K data, 108K init)
Calibrating delay loop... 183.09 BogoMIPS (lpj=915456)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
Number of DMA channels = 5, version = 4
Allocating 891 SRAM generic DMA descriptors
Chip Id: die-id 0x0b34bd776bc0 read back 0xbeefcafe
SCSI subsystem initialized
libata version 3.00 loaded.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
Hello, LED trigger
fuse init (API version 7.9)
SGI XFS with large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x44300000 (irq = 24) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
ox810sata: OX810 sata core.
scsi0 : oxnassata
ata1: SATA max UDMA/133 irq 18
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-11M2B2, 80.00A80, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     WDC      WDC WD10EADS-11M 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ox810sata: OX810 sata core.
scsi1 : oxnassata
ata2: SATA max UDMA/133 irq 18
ata2: SATA link down (SStatus 0 SControl 300)
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sda4 ...
md:  adding sda4 ...
md: sda3 has different UUID to sda4
md: sda2 has different UUID to sda4
md: sda1 has different UUID to sda4
md: created md2
md: bind<sda4>
md: running: <sda4>
raid1: raid set md2 active with 1 out of 2 mirrors
raid1 not hw raidable, needs two working disks.
md: considering sda3 ...
md:  adding sda3 ...
md: sda2 has different UUID to sda3
md: sda1 has different UUID to sda3
md: created md3
md: bind<sda3>
md: running: <sda3>
raid1: raid set md3 active with 1 out of 2 mirrors
raid1 not hw raidable, needs two working disks.
md: considering sda2 ...
md:  adding sda2 ...
md: sda1 has different UUID to sda2
md: created md1
md: bind<sda2>
md: running: <sda2>
raid1: raid set md1 active with 1 out of 2 mirrors
raid1 not hw raidable, needs two working disks.
md: considering sda1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: running: <sda1>
raid1: raid set md0 active with 1 out of 2 mirrors
raid1 not hw raidable, needs two working disks.
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing init memory: 108K
Adding 256888k swap on /dev/md1.  Priority:-1 extents:1 across:256888k
Registered led device: oxnas-wd810-leds:switch
Registered led device: oxnas-wd810-leds:state
Registered led device: oxnas-wd810-leds:activity
Registered led device: oxnas-wd810-leds:capacity
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Probing for Synopsis GMAC, unit 0
eth0: PHY is LSI ET1011C
eth0: GMAC ver = 51, vendor ver = 17 at 0xe8000000, IRQ 8
eth0: Found PHY at address 1, type 0x0282f014 -> 10/100/1000
eth0: Ethernet addr: 00:90:a9:80:d5:91
thermAndFan: initializing - ox810
Power button driver registered
Recovery button driver registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver@e7000000 Device ID register 42fa05
oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
oxnas-ehci oxnas-ehci.0: irq 7, io mem 0x00000000
oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
eth0: PHY is LSI ET1011C
ufsd: module license 'Commercial product' taints kernel.
ufsd: driver loaded at bf050000 built on Jul  3 2009 15:56:21
UFSD version 7.04 (Jul  3 2009, 15:36:35)
NTFS read/write support included
Hfs+/HfsX read/write support included
$Id: ufsdvfs.c,v 1.207.4.1 2009/05/14 14:37:07 shura Exp $ (LBD=ON)
OXNAS bit-bash I2C driver initialisation OK
rtc-ds1307: probe of 0-0068 failed with error -5
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
CoPro: Programming start address as 0x9801e000 (basic adr = 0x9801e000)
eth0: LSI ET1011C PHY no Rx clk workaround start
Resetting GMAC
eth0: LSI ET1011C PHY no Rx clk workaround end
GMAC reset complete
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
oxnas_wd810_leds_state state=9
eth0: PHY is LSI ET1011C
eth0: link down
eth0: link up, 1000Mbps, full-duplex, using pause, lpa 0xCDE1
oxnas_wd810_leds_state state=10
oxnas_wd810_leds_state state=11
oxnas_wd810_leds_state state=12
Filesystem "md2": Disabling barriers, not supported by the underlying device
XFS mounting filesystem md2
Ending clean XFS mount for filesystem: md2
Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License